Instruments
Cone and Plate Viscometers

Cone and Plate Viscometers

Most of paint and coatings are non-Newtonian fluids, its viscosity would show typical changes when applied with roller, brush or spray gun under high shear rates.

BGD 159 series Cone and Plate Viscometers designed by ISO 2884, ASTM D 4287 and BS 3900, can offer from 10,000S-1 to 12,000S-1 shear rates.

 

Features

 7 inch touch screen with powerful human-computer interactive interface and rich information, easy to operate

 Interchangeable cones, simple to install and easy to clean

 Choice of shear rate. Standard speeds include 750 and 900 rpm to provide shear rate at 10,000 sec-1.

 only need small sample amount< 1 mL, simplifies testing

 Build-in PT100 temp. probe

 ARM chip processor and Gigabit Ethernet port ensure higher data processing speed and rapid& stable data transfer

 New designed durable axle, anti-static shell and metal lifter

 Come with heating and temp. control system, can set sample plate temperature from -5°C to 120°C or RT+5°C to 250°C 

 Variety of viscosity units and auto switch between dynamic and kinematic viscosity

 Calibration by usertemperature and correction factor protected by password                       


How to choose your suitable Viscometer?

1. Specify one speed or shear rate if this is required for your method.

2. Indicate viscosity range.

3. Select the temperature range that best suits your application:  -5°C to 120°C (L Type) or RT+5°C to 250°C (H Type)

4. Choose from 10 cones for multiple viscosity ranges


1581668415913570.jpg

BGD 159/1~3


     1583312368946532.jpg

  BGD 159/4

 

Main Technical Parameters

 

Ordering Information 

  Parameters   

BGD 159/1

400 RPM

BGD 159/2

750 RPM

BGD 159/3

900 RPM

BGD 159/4

@5-1000 RPM

  Cone No.CAP-01
  Shear Rate
13.3N

Sample Volume67μL

47-469

mPa.s

25-250

mPa.s

20-208

mPa.s

20-37,500

mPa.s

  Cone No.CAP-02
  Shear Rate
13.3N

Sample Volume38μL

90-938

mPa.s

50-500

mPa.s

40-417

mPa.s

37-75,000

mPa.s

  Cone No.CAP-03
  Shear Rate
13.3N

Sample Volume24μL

180-1,875

mPa.s

100-1,000

mPa.s

80-833

mPa.s

75-150,000

mPa.s

  Cone No.CAP-04
  Shear Rate
3.3N

Sample Volume134μL

300-3,750

mPa.s

200-2,000

mPa.s

170-1,667

mPa.s

150-300,000

mPa.s

  Cone No.CAP-05
  Shear Rate
3.3N

Sample Volume67μL

600-7,500

mPa.s

400-4,000

mPa.s

300-3,333

mPa.s

300-600,000

mPa.s

  Cone No.CAP-06
  Shear Rate
3.3N

Sample Volume30μL

1,500-18,750

mPa.s

1,000-10,000

mPa.s

800-8,333

mPa.s

750-1,500,000

mPa.s

  Cone No.CAP-07
  Shear Rate
2.0N

Sample Volume1700μL

78-787

mPa.s

N/A

N/A

32-63,000

mPa.s

  Cone No.CAP-08
  Shear Rate
2.0N

Sample Volume400μL

313-3,125

mPa.s

N/A

N/A

125-250,000

mPa.s

  Cone No.CAP-09
  Shear Rate
2.0N

Sample Volume100μL

1,250-12,500

mPa.s

N/A

N/A

500-1,000,000

mPa.s

  Cone No.CAP-010
  Shear Rate
5.0N

Sample Volume170μL

100-1,250

mPa.s

N/A

N/A

50-100,000

mPa.s

NOTE: 

1. "N"=Rotor Speed

2. Each Ordering Information has two different types according to temperature range:-5°C to 120°C (L Type) or RT+5°C to 250°C (H Type) 

THD Series---Low Temperature Thermostatic Bath
BGD 1600---Standard Oil(500ml)

BGD 1601---Low Viscosity Adapter(The 0th rotor and can measure 1.0 mPa.s sample)

BGD 1602---Small Sample Adapter(It’s specially designed for customers with small samples and requires only a quantity as small as 5~18ml;Sample cup is easily cleaned, installed, removed, and observedAccurate data of shear rate and shear stress can be obtained for a minute analysis of the fluid characteristics of the sampleOne-off sample cups are available)

BGD 1603---Mini Single Color Printer

BGD 1604---RTD Thermometer(-20℃~150℃)

BGD 1605---Thermoses(It has been designed to accurately measure the viscosity of heated oil, paraffin, asphalt emulsions, medicine, high polymer and similar liquid materials at high temperatures. It allows control of a sample’s temperature at a range of room temperature +300℃. It can program the intelligent thermostat and ensures its temperature fluctuation within 0.1℃. Sample dosage is as small as 10ml, and one-off sample cups are available. Standard type of SC4 spindle can be applied, which is easy to use)

BGD 1607---BGD 155 Viscometer data collection and graphing softwareAutomated data collection; resulting in viscometer graph, and recording measuring data each timeAllowing comparison of at most 10 history data;Output Excel documents)

BGD 1608---BGD 156-157-158 Viscometer data collection and programmed analysis software(Automated data collection and testing; resulting in viscometer graph, and recording measuring data each time;Allowing comparison of at most 10 history data;Output Excel documents;Programmable downloading, Offline working;Analyses data, draw charts and print)

Subject:
Company:*
Name:
E-mail:*
Country:*
Comments:
Verification Code:Click ChangeCan't see clearly. Change it?
 
Send message
Contact USMore

Biuged Precise Instruments (Guangzhou) Co.,Ltd

AddNO.15, Fuzhong Rd., Zhongxin Town, 

Zengcheng District, Guangzhou.China

Tel+86-20-32955999;+86-20-32955820

Fax+86-20-32955819 

E-mailjack@biuged.com

Website http://www.biuged.com 


Biuged Instruments Co.,Ltd.

Add:RM.310, NO.1, Sicheng Rd.,
Tianhe District, Guangzhou.China

Tel:+86-20-82169666

Fax:+86-20-32955818

E-mail:jack@biuged.com





Biuged Precise Instruments (Shanghai) Co.,Ltd

Add:Room 906, 9th Floor, Zhongcai Industrial Park, No.1111 Zhu Feng Road, Qingpu District, Shanghai, China

Tel:+86-21-59240298

Fax:+86-21-59249719

E-mail:xjx@biuged.com

  Biuged Laboratory Instruments (Guangzhou) Co., Ltd.   Guangdong ICP record number:11044672